Sanjay Mishra (Director)
Regent Hitech Private Limited
A-6, Sector - 59, Noida,
201301, INDIA
Works Tel.91(120)2587078
Tel.91(11)25744909
                 25782966
Fax.91(11)25782967

E-mail: info@regenthitech.com



Regent Hitech Butterfly Valves are designed and manufactured to have optimal mix of structural stability, flow efficiency and effective seating coupled with advantage of light weight, compact design and ease of operation.The valves are provided with integrally moulded elastomer body liner for perfect seating and complete isolation of body material from fluid media. No gaskets are required as the body liner effects a perfect seal between the valve body and the mating pipe flanges

A)BODY :- Regent Hitech is one piece design. Top Flange is designed to mount required Valve Operator.

B)Body Liner :- is integrally moulded and bonded to the body. It provides the seating to valve disc, primary seal to the stem and 'gasket' joint with mating pipe flanges. Integrally moulded liner resists any stretching or distortion of the liner which is a common problem of loosely fitted liner leading to frequent replacements.


C)Valve Disc :-material covers wide range of applications. It is optimally designed to have an ideal combination of strength and flow efficiency.

D)Stem :- For optimal combination of flow efficiency and structural stability, Valves upto 200mm (8") have two piece stem. For sizes 250mm (10") to 600mm (24") N.B. stem is in single piece construction which ensures better distribution of weight of the disc. The stem drives the disc through taper pin(s) to eliminate any backlash between Stem & Disc. The material of construction for stem has been standardised as High Tensile Stainless steel (AISI 410).

E)Stem Seal Arrangement :-Primary Sealing is provided by preloaded contact between flat seat surface and rounded polished disc hub area.Secondary Sealing is provided by the interference fit between stem and stem hole in seat at all positions

F)End Connections :- Wafer type flanges are as per BS 4504 PN 10 & 16, BS 1560 classes 125 & 150, ANSI B 16.5 Class 150, ANSI B 16.1 Class 125, BS 10 Table D, E & F and Indian Standard IS 6392 Table 10 to 20. Lug type valves are supplied to suit customers specifications.

APPLICATIONS :-
-- OIL & GAS PRODUCTION PROCESSING.
-- WASTEWATER TREATMENT PLANTS
-- CHEMICAL PLANTS
-- POWER PLANTS
-- SEA WATER APPLICATIONS
-- CHEMICALS & PETROCHEMICALS
-- GENERAL INDUSTRY

Click Here To Query »
Copyright 2006-2007© Regent Hitech Private Ltd. All rights reserved.